Executive Council

President

After joined SOMEFLU in the early 2000s, Alexandre filled several positions in the company.

Graduated of an Executive MBA at EPITECH, an IT Engineering school, since 2019, he is the CEO of G&P. G&P is a French industrial company which manufacture thermoplastic centrifugal pumps brand SOMEFLU®, CHEMICAL® and process high-performance plastic through APLAST® activities.

After 15 years in the pump industries, he is also consultant for some digital think tanks, innovation Labs, accelerators and was in charge of industry 4.0 cycle in 2019 for the Hub Institute. He is driving the transformation of group activities towards innovative models.

He was elected Second Vice-President in May 2021.

1st Vice-President

Markus has a M.Sc. degree in mechanical engineer from Royal institute of technology in Stockholm and has 20 years of experience in submersible wastewater pumps, dewatering pumps and mixers.

He is heading the department at Xylem R&D in Stockholm responsible for regulations, standards, product safety and documentation. Since 2010 Markus has been a member of Europump Standards Commission and Technical Commission and has for the last four years been the chairman of Europump Lot 28 workgroup Markus is active within the Swedish pump supplier association, Swepump, and is representing Swedish Standards Institute at CEN/TC 197 and ISO/TC 115

2nd Vice-President

Jim holds a Master of Mechatronic Engineering from Dublin City University. He has been working within the pump industry for more than 20 years mainly in engineering, product development and testing. Currently he is Head of Product certification and safety within the Flow Equipment division at Sulzer.

Jim is active within the British Pump Manufacturers Association, BPMA, and is representing the National Standards Authority of Ireland at CEN/TC 197 and ISO/TC 115

Past President

Lubos Michlik is CEO of SIGMA GROUP holding and President of Czech Pump Manufacturers Association (CPMA).

After he joined SIGMA GROUP in 2011, he filled several different sales positions. Lubos Michlik obtained the Master Degree in the field of Power Engineering at the Faculty of Mechanical Engineering, Czech Technical University in Prague in 2007.

Since 2019 Michlik is Council Member of the Czech Pump Manufacturers Association (CPMA) and since 2020 he has been chairing the Europump Blue Print Working Group. He became President of EUROPUMP in June 2023.

Past President

After graduating from Bologna University as a Management Engineer in 1997, Vanni Vignoli started working as a Technical Sales in a company supplying services and consultancy to enterprises.

He moved to Caprari where he started as an engineer in the R&D Department and then became Research and Development Engineering and Technical Data Manager.

After a few years, he took over the role of Marketing Manager and is now the Head of Group Marketing. He is also Sales Manager for some Regions and Responsible of some Daughter Companies within Caprari Group.

Vanni is a member of the General Council of Assopompe and Chairman of Assopompe Marketing Commission. He is married with two children and is a keen sportsman.

He was elected President in May 2021.

Council Member

Wim Bonte got his Master of Science degree in Electromechanical Engineering in 1996 on the KHBO in Oostende.

Immediately after his studies, he started as R&D engineer in the pump division of Packo Inox LTD.

In 2009 he promoted as technical manager Pumps at Packo Inox LTD and since 2014, Wim Bonte is Business Unit Manager Pumps at Packo Inox LTD. Packo Inox LTD is part of the Dutch Verder Group.

Council Member

Born in 1961, in Ankara; educated at TED Ankara College and METU (Middle East Technical University); obtained his Master of Science degree in CAD (computer-aided design) while working at Power Plants Department of Turkish Electricity Authority. He completed his military service obligation as a lieutenant in the Turkish Navy.

Since 1988, as a partner and professional, he holds executive management duties at the Aydıner Group, mainly in the boards of Samsun Machinery Industries and Layne Bowler companies, both having 50 years of history in Turkey in pump, valve and pipe production.

Council Member

Born in 1964, married father of 3 children, living in Switzerland.

After an apprentice in the chemical analytical laboratories of the nuclear power plant KKW Gösgen-Däniken, Daniele Nardin completed his study as chemist at the Fachhochschule Burgdorf. He post-graduated further as Wirtschaftsingenieur at the Kaderschule St. Gallen (economics / sales & marketing). Daniele started his professional career as process and sales engineer at Montedison, then joined Buss Chemtech where he was responsible a technology manager for the gas-liquid reactor technology promotion.

Later he held positions as managing director with Ing. A. Maurer SA, joined in 2005 CP Pumpen AG as Director Sales and Business Development, then Rütschi Pumpen as Director Industrial Division, to join then KSB (Switzerland) as Managing Director. Daniele Nardin joined CP again in 2018 as Manager Sales Support & Marketing.

In his function as CCO, Chief Customer Officer Daniele is responsible for all inbound Sales Support functions, Spare Parts, Repair Services and After Sales Service in general. Parallel to his professional functions in the pump industry, Daniele Nardin has been a delegate at the National Swiss Pump Manufacturer Association, where he acts as elected President.

Council Member

President of the Stowarzyszenie Producentów Pomp (Polish Association of Pump Manufacturers). Grzegorz Pakuła in 1981 graduated from the Department of Mechanical Engineering of the Silesian Technical University, Poland.

Until 1994 he carried out research work at Technical University of Silesia and at Liverpool University. In 1988 he obtained the Ph. D. degree in computational fluid dynamics.

In 1994 he joint the pump industry. Initially worked for Warman International (Polish branch), then, from 2000 for Powen group, the biggest Polish pump manufacturer. Member of the Board of Directors of POWEN SA.

Council Member

Jukka-Pekka Peri is Head of Global Product Development of the Industry business unit in the Flow Equipment division at Sulzer. 

Jukka-Pekka Peri has been working within the pump industry for more than 20 years mainly in engineering and product development. 

He is chairman of the Finnish Pump and Compressors Manufacturers group and represents the federation Technology Industries of Finland in the Europump Council.

Council Member

Dr. Jörg Praczyk is Senior Vice President Research & Development of Wilo SE.

After joining Wilo in 2006, he held several responsible positions in different technical functions. Jörg Praczyk studied Electrical Engineering at the Technical University of Dortmund where he also obtained his PhD in the field of control engineering in 1999. Following this, he worked for Demag Cranes & Components as a project manager and head of drives.

Since 2019 Jörg Praczyk is Member of the Board of Directors of the German VDMA association Pumps + Systems. Since 2023 he is EUROPUMP Council member.

Council Member

After graduating as MScEE and completing his PhD within Control Engineering, both at Aalborg University, Steen Tøffner-Clausen joined Grundfos A/S in 1997.

He has held several positions in Grundfos both in Product Development, Manufacturing and Product Program Management.

From 2008 until early 2015 Steen Tøffner-Clausen was Program Manager for the Grundfos Circulator portfolio and following this, until early 2019, held the position as Senior Program Director, Building Service having the responsibility for the Grundfos Building Service product portfolio.

Early 2019 Steen Tøffner-Clausen took up a new position as Senior Technical Director in Grundfos HVAC OEM business unit.

Council Member

After graduating in automotive engineering and management at IVA Driebergen Business School and completing a marketing course at the City of London Polytechnic in 1987, Martijn van den Born started his career as a trainee at the family business in pump and filter production. In 1990 Martijn became Commercial Director.

In 1994, the first generation Arnold van den Born retired and Martijn became CEO. In 1996 he acquired the company by management buyout.

Over the past 20 years, the company has strongly developed from a general manufacturer of plastic products into a specialised designer and producer of thermoplastic centrifugal pump and process filters. ARBO Pumps and Filters has been a member of the Holland Pump Group over the past 10 years and Martijn became President in October 2013.

Council Member

Georgios Polemis got his bachelor’s degree in marketing from Liverpool University. He is Vice President, Head of Sales and Business Development since 2008 at Drakos Polemis SA, a family business of Pumps, awarded the Most Growth Business in Greece in 2023.
He is a member of Export Committee, Hellenic Federation of Enterprises.

Honorary Council Member+

Ken Hall is a qualified Engineer and business manager who has been involved in the pump industry for over 40 years. Now retired after 39 years with Calpeda, having been responsible for their operations in the UK, Ireland and Sub-Saharan Africa. Ken served as President of both the British Pump Manufactures Association (BPMA) and Europump, having been the BPMA representative on Europump council for 15 years and was Europump’s energy commissioner and founder of the European pump industries energy strategy ‘Ecopump’ promoting the strategy to the European Commission, European Governmental organisations and Eco events worldwide. Ken was made an Honorary Europump Council Member in 2017.

Honorary Council Member+

Pierre Plateus qualified as an engineer in electro-mechanics in 1965 from the University of Liège in Belgium. He also completed a complementary course in electronics at the TH Delft in The Netherlands.

He was an Assistant at the Von Karmann institute for Fluid Mechanics in 1967, then joined ENSIVAL where became Head of the research department, Head of the engineering department, Commercial Manager and finally Export Commercial Manager of the Ensival-Moret pump company.

He was President of the Europump Standards Commission for 10 years, a member of the Europump Executive Council until 2016, and is now an honorary member of the Executive Council. After retiring from Ensival-Moret, he created a small company known as PLATEUS – CONSULT which specialises in the fields of mechanics & hydraulics, principally for rotating machines.

Chair, Technical Commission+

Julien holds a Master of Science in mechanical engineering from the Ecole Nationale d’Ingénieur de Tarbes and a Master in Environmental Management from Arts et Metiers ParisTech.

After working in the industrial machinery sector, Julien joined the French Pumps Association in 2011 and got involved in Europump activities as well as standardization.

He joined Wilo in 2022 where he is in charge of technical advocacy.

Chairman, Standards Commission+

With a degree in Electrical Engineering (Dipl.-Ing.),Michael joined KSB in 2011, managing research projects in the field of drive technology.

Since 2015, he has been actively involved in industry committees and associations, serving as a liaison to key organizations such as EUROPMP, ZVEI and CEMEP.

Michael's work focuses on strategic standardization at international level, particularly within ISO and IEC. Since 2025, he assumes the role of Chairman of Europump's Standards Commission.

Chairman, SME Commission+

Duilio holds a Master Degree in Mechanical Engineering from Politecnico di Bari and has worked in Centrifugal Pumps design for O&G and adjacencies since  1999, covering different positions in the organisation. He managed the department form 2013 to 2016, covering projects execution and R&D programs. Moved in 2017 to manufacturing, Duilio managed assembly and testing cells.

Baker Hughes - Centrifugal Pumps Product Leader, Bari Plant in position since last January 2019

Secretary General+

After graduating from European Studies in Germany and France, Lisa Kretschmann started her career in International Trade Associations in Brussels in 2000. For the next 20 years she served industry sector associations in different responsibilities including PR and regulators affairs; over the last 12 years she has been holding management positions.

In 2020 Lisa created her own business, working as Management consultant, as leadership coach and yoga teacher. She is passionate about personal development and outdoor sports. She speaks English, German and French as well as some Dutch and Spanish.